How To Measure A Floor Register Grate

TROUBLESHOOTING TIPS:

Duct opening is in a toe-boot or close to the adjacent wall?

If a duct opening has restrictions in terms of outside dimensions considering information technology needs to fit within the limited space of a toe boot, or it is too close to the side by side wall/ceiling you may require a custom outside dimension. Most of our laser cut metal covers (aside from Quick Transport items), likewise as our wood covers can be adjusted to fit the right edge size you lot require--if you need a custom exterior dimension please make full out the custom asking form hither.

Have a Non-standard Size?

There is no demand for precise measurements, you tin circular the measurement to the nearest one/2" size. east.g. If your duct opening measures nine-3/4" ten 9-3/iv" a 10x10 cover will work.

If your duct opening is rounded to the nearest 1/2" size and you still cannot observe your duct opening size listed don't worry. Many of our covers are available in custom sizes. Click hither to fill our our Custom Size request form.

New wall or floor trim leaving no space for a standard cover border size?

Don't worry, we can adjust the size of your cover to fit! In many cases you lot will need to size down the cover to ensure the cover and its accompanying border volition fit your duct. This is done by subtracting the size of the border (typically 1"-ane.5") from the opening size. eastward.g. a 10"x4" duct opening that butts up confronting a wall can be covered by a 10"x3" cover. Please phone call the states if you are unsure of your measurements.